fd30
  • fd30

Single 30min FD

Cost: €1,180


Shipping : €70

If you would like any further information regarding the FD30 pocket door systems, please contact us on 091 734043/087 9768107 or email us on info@pocketdoors.ie

Category: Tag:

Additional information

Door Panel Size(mm): REQUIRED

1026x2040mm, 610x1981mm, 711x1981mm, 726x2040mm, 762x1981mm, 813x2032mm, 864x2032mm
Finished Wall Thickness(mm): REQUIRED

100mm

Fully tested and approved sliding pocket door system for use with FD30 fire doors.  Fire rated System offers all of the great advantages of the independently tested  metal frame system and jamb/architrave kit made from a very special hard wood  called Pterygota bequertii commonly known as Koto. The jambs are treated with an  intumescent primer and routed out to accept standard 15 x 4 mm intumescent strips  that you can find in most builder/timber merchants.  

You are limited to use a specific door design.  

For more information and all available sizes, please click below. Please note door  panel is not supplied with this kit. It is highly recommended to read the  following information carefully. Please do not hesitate to contact us for  further queries. 

What is Included

What Is Included?

  • Metal Frame
  • Metal Door Post
  • Top Beam with Track
  • Door Mounting Kit
  • All required screws
  • Supplied with full jamb kit including pocket entrance and top horizontal jambs and dust brushes.

Fire Rated Door and plasterboard are NOT supplied.


Installation

Installation

The Eclisse pocket door system can be used in new build, solid or stud walls, just by including the overall dimension in the wall design. In existing buildings with stud walls it is a relatively simple job to remove the required amount of the stud-wall to be able to incorporate the frame.

Eclisse have spent a great amount of research and development to have the simple and easiest product to assemble and install. Assembly of the pocket takes a matter of minutes using horizontals that click together and installation is by simply screwing through the top and end verticals into the wall. Please note, all measurements are based on the final finished floor level (final finished floor level includes for final floor covering i.e. tiles)

Order of Work

  1. Frame assembly
  2. Frame installation
  3. Door installation

You can plasterboard at any time after frame assembly.


Assembly Made Easy

Assembly Made Easy

The pocket has a “screwless” assembly process and can be assembled in a matter of minutes – simply, easily without the risk of mistakes.

The complete frame is then screwed into the existing structure through the end verticals and special positions along the top track holder.


Finished Wall Thickness

Finished Wall Thickness

In Fire Rated Model the only finished wall thickness available is 100mm.


Anti - Warp Profile

Anti-Warp Profile 

This U shaped profile fits into the bottom of the door and ensures the sliding action remains smooth over time even if the door should warp. THIS ITEM IS FREE OR CHARGE WITH THIS KIT.

This is an ingenious addition to the Eclisse system which is now supplied as standard with every single and double system.

The aluminium profile is inserted into a routed channel in the underside of your door . This means that should the door warp (as many do) at any stage in the future the smooth sliding system would not be affected. This is very important for long term customer satisfaction. The floor surface is not affected in any way and you can still have a continual floor surface between the rooms.

Delivery

Delivery

Please allow up to 2-6 working weeks delivery time.


Additional Information

 

Data Sheet PDF         30min Fire Rating

 

Please refer to the data sheet for all the sizes available.  

Tip 1 – The most common door panel size for Irish market are 711 x 1981mm, 762 x 1981mm, 813 x 2032mm and 864 x 2032mm. Consider choosing this sizes – most likely your favorite door supplier will have this size of the panel off the shelf, thus door shopping becomes hassle free! 

Tip 2 – Please be aware of regulations! If considering pocket door for wheelchair use the minimum passage size is 34”. You may allow for plenty of space and acquire our biggest kit for the door panel of 1026mm x 2040mm.